Re: [MW:25454] Welding of Dissimilar Thickness & Dissimilar P number

I think NO... as the joint is dissimilar thk but not similar P numbers.....in our case P numbers are P1 & P43

please advise...

Aly

On Wed, Sep 21, 2016 at 5:28 PM, Pravin Nimbalkar <pravin.nimbalkar4@gmail.com> wrote:

Yes you can!
"Quite interesting question"

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/dab18339-8702-4ab8-b007-7548361c7239%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOenW4gok8b0Ythsk43mEM9DgotuaqF%2B2HEL76PjRpLoTkvzaA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.