[MW:25390] RE: 25378] Would 317L grade stainless instead against 316L

What’re the design and process requirements? Could you be specific??

 

Thanks.

 

Pradip Goswami, P.Eng,IWE
Welding & Metallurgical Engineering Specialist ,
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299

pgoswami@quickclic.net

pradip.goswami@gmail.com

 

 

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Harikrishna Desiti
Sent: Tuesday, September 13, 2016 5:05 AM
To: materials-welding@googlegroups.com
Subject: [MW:25378] Would 317L grade stainless instead against 316L

 

Dear sir / experts, 

                          

We are now at the stage of selection of some analyzers, Would I used 317L grade stainless instead against 316L grade stainless. 

 

 

Thanks & Regards..........?

 

HARIKRUSHNA DESITI

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAhim5%2BKcFPVRDLHkSVj5pg2JNYhpyUp1DYX7h6PV_dvVbc_PQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.