[MW:25367] SAW flux with low hydrogen content

Dear Experts

I need some information about standard method or test procedure which introduce testing on SAW flux to assure low hydrogen content.

For example when I have BS EN ISO 14174 / S A FB 1 65 AC H5 flux, How could I assure this is H5?

Regards
--

M. Shokri Arfaei

ASNT NDT Level III

International Welding Engineer

Mob.:+98 912 1394023

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAC8uMts2uhtD4ToPUH1D9QZWnOvaCfubxj_SugMdmVZtoKmnBA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.