pl. refer @ https://groups.google.com/forum/#!topic/materials-welding/6VwG0H2EAPE
-- - AWS A5.14/ASME SFA-5.14: ERNiCrMo-3
On 15 September 2016 at 15:23, 'prem_nautiyal26' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Can anyone suggest correct tig filler wire for welding of
A 182 F44 : UNS NO. S 31254Please suggest only TIG welding consumable classified in ASME SEC II C.Unlisted filler wires are not acceptable to client which is a long procedure.Job thickness is less than 10mm.
Design temp is 85 degree CelsiusCode of construction is ASME B31.3RegardsPrem Nautiyal
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVub%3Do6-GYDjfrmMk1ACFP-biiRPxJa%2BLuuWQcLmw6Ucg0uQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment