Re: [MW:25361] WPS requirements according to PQR

Please check again your drawing and project requirements. 

Material Sa333 for low temp. And required impact.

your vessel no need impct then you can prepare your wps on bassis on pqr.

Regards

a p gupta

Sent from Yahoo Mail on Android

On Sat, 10 Sep, 2016 at 19:04, Himanshu Panchal

<mec4him@gmail.com> wrote:

Dear All,

I want to prepare a WPS for SECVIII Div-1,Material-SA333, MDMT: -46C,Thickness 24 mm.

As per vessel drawing there is no impact test and PWHT requirement.

I have one PQR without impact test.

Can i prepare the WPS based on that PQR who is with out impact test?

MDMT of vessel is -46C.

Thanks & Regards,

Himanshu panchal

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKHjqA0P6GGCHuozpPeM7P0f5KuaQJhh0CiS1MHYdkrFNqp0Kw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/759121112.1845101.1473517943323%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.