Re: [MW:24619] Lethal service requirement

Dear Sachin,
Check your project specification & process data sheet requirements.

Technically you can perform perform PWHT.

Regards,
Vijay Patre

On Apr 2, 2016 1:01 PM, "sachin sankhe" <sachin.sankhe@rediffmail.com> wrote:

Dear Friends,

Need your opinion on below

Equipment

Columns

Design Code

ASME SEC VIII Div.1

Process 

High Wet H2S service(NACE)

Wet Amine service

Very Toxic

Lethal(ASME SEC VIII, UW-2)

Metallurgy/Thk

Base Metal MOC=SA516 Gr.70

Thk=8mm

Clad MOC=SS316L

Clad thk=3mm

Problem

Is PWHT mandatory for clad vessel for above process condition?

For lethal service is PWHT not mandatory for clad vessel as per Table UCS56.1 Note (e)

Regards

Sachin Sankhe

Get your own FREE website, FREE domain & FREE mobile app with Company email.

Know More >

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20160401172500.21291.qmail%40f5mail-224-128.rediffmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPi2c28zg9DbN%2Bv1Xfmp38ox5i_9-U1Mm%2BZgpqgnFe0gj1pGDg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.