If you have the material Certificate of Compliance from the mill yes.
If you want to verify the material then this should be for your information only.
Be very careful trying to recertify material.
By doing so you could be assuming liability.
Best Regard,
Jim Price | Welding Engineer, CWI
Direct: 320.7463439 |
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Kadir godil
Sent: Tuesday, September 01, 2015 3:55 AM
To: Materials & Welding
Subject: [MW:23378] DN 80 Carbon steel pipe
Dear Experts,
I have a 80 mm dia pipe. I have done its wet chemical analysis according to IS228. The result shows as below,
C - 0.06
Si - 0.55
Mn - 0.45
P - 0.024
S - 0.023
I checked standard IS 1239. As per this standard, the chemical composition should be (all max), C - 0.2, Mn - 1.3, S&P - 0.04%.
My question is, can I say my pipe is IS 1239 pipe?
Please suggest what grade is my pipe?
Thank you.
Sincerely,
Abdulkadar
--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ef3fedae-c74f-45ea-943f-2a10ab38ffd8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment