HI Mohd,
As per ASME B31.3 Edition2014, there is the exception for PWHT for P1 Carbon steel materials.
A1.: Regardless of thickness, no PWHT for P1 Carbon steel Material if they meet the Limitation mentioned on the Table 331.1.3.
A2.: For carbon steel thickness > 25mm thickness, preheat of 95deg is an limitation for P1 material for avoiding PWHT.
Regards,
M. Sivachidambaram.
QHSE ENGINEER
GATES ENGINEERING & SERVICES.
On Tue, Sep 1, 2015 at 12:24 PM, S.Mohammed <mohd52100@gmail.com> wrote:
Dear all,--As old ASME B31.3-2012 we know it was above 19mm req pwht,now i read ASME B31.3-2014,little confused me with pwht exemption and pwht requirements and control thickenss 331.1.3?q1- what is thik req for pwht for P1 as per b31.3 2014 ?q2 : for P1,mentioned more than 25mm thk and 95C preheat exemption from pwht so less than 25mm not require pwht ?regards,mohd.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/33c22bce-8302-43cc-a853-e114ef80ace3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPJQpMVjbLvF4KUpvKWSjoyNGgWnP%2B76VRvgwVJB5Jj_bS5CNA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment