no / because the recording process as GTAW less than 13mm . |
From: mahammed javeed <javeedcwi@gmail.com>;
To: <materials-welding@googlegroups.com>;
Subject: [MW:20190] Mutiple WPS from single PQR
Sent: Thu, Feb 27, 2014 11:58:40 AM
Gents, -- I have PQR with impact test requirements and the details are below like this. Base material thickness 11mm with impact test requirements Process GTAW & SMAW base metail qualified range 11mm- 22mm GTAW process deposited weld metal qualified range 8 mm SMAW process deposited weld metal qualified range 14mm Now I want to make a WPS for a job of 6mm only using GTAW process, I have found a difficulty in understanding the base metal thickness range qualified. Can I consider only weld metal deposited thickness range this process and make a WPS? Regards M. Javeed To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out. |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment