MB,
VT & PT - that's all you need
With Best Regards,
Shashank C Vagal
On Wednesday, 19 February 2014 4:31 PM, MK Sethu <scorpiosethu@gmail.com> wrote:
Which probe is to be used for lamination check in pipe bevel. Kindly explain how to do inside or outside the pipe
-- Thanks and regards
MK Sethu
On Tuesday, September 18, 2012 12:17:14 PM UTC+1, muthu barathi wrote:
On Tuesday, September 18, 2012 12:17:14 PM UTC+1, muthu barathi wrote:
You have to mention some more details for correct advice.
1. whether the bevel was made by gas cut or machining?
If gas cut used w, while gas cutting it might be opened if lamination was present.
AC will detect only surface not sub surface.
If you want to see sub surface defects then you have to go for HWDC. That also you can go up
to 3mm effectively.
On Mon, 17 Sep 2012 21:36:56 +0530 wrote
>Dear Exparts,
I have a doubt regarding MPT method.
I am going to check the lamination of plates from the bevel edges.
What MPT current mode should we use.
Is it AC or HWDC?
Please share your knowledge and code references.
--
Thanks & Regards
Biplab Pal
Welding Inspector
E-mail: bipla...@gmail.com
Information in this email and any attachments is confidential and intended solely for the use
of the individual(s) to whom it is addressed or otherwise directed. Please note that any views
or opinions presented in this email are solely those of the author and do not necessarily
represent those of the Company. Finally, the recipient should check this email and any
attachments for the presence of viruses. Myself accepts no liability for any damage caused by
any virus transmitted by this email.
--
>
To post to this group, send email to material...@ googlegroups.com
>
To unsubscribe from this group, send email to materials-weld...@ googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding. blogspot.com/
>
http://www.linkedin.com/ groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
>
>
The views expressed/exchnaged in this group are members personel views and meant for
educational purposes only, Users must take their own decisions w.r.t. applicable
code/standard/contract documents.
>
>
>
Dear Sir,
Thanking You.
With Warm Regards,
Muthu barathi P,
Mobile No. 9099006785
Follow Rediff Deal ho jaye! to get exciting offers in your city everyday.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment