Re: [MW:20130] RE: 20114] Use of E7018 instead of E7018-1 - Low Temperature Pipe.

E7018 is not suitable below minus 29deg. Use only E7018-1 which is suitable up to minus 45

THANKS & BEST REGARDS

KG.PANDITHAN, AWS-CWI, CSWIP 3.1

CONSULTANT-WELDING & QUALITY

On Mon, Feb 17, 2014 at 6:11 PM, Richard robes <mech.processes@gmail.com> wrote:

Hi,

Design Temperature is  -45°C, Electrode used is E7018 with -40°C impact tested. 

Regards

Richard
 

On Mon, Feb 17, 2014 at 8:34 AM, pgoswami <pgoswami@quickclic.net> wrote:

Hi Richard,

 

What is the design temperature ?   what was the impact test temperature for PQR qualification vs. the AWS classification used E 7018/E-7018-1?

 

Usually these electrodes are manufactured to meet dual certification i.e,7018/7018-1 and are tested for impact @ -45Deg C. If such electrode is used for production weld then no issues.

 

Otherwise E-7018(certified for impact @-29 Deg C) is not matching to SA 333 Gr6 (guaranteed impact -46 Deg C) base metal.

 

Thanks.

 

Pradip Goswami, P.Eng,IWE

Welding & Metallurgical Specialist

Ontario, Canada

pgoswami@quickclic.net

pgoswami@sympatico.ca

 

 

---

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Richard robes
Sent: Sunday, February 16, 2014 9:59 PM
To: materials-welding@googlegroups.com
Subject: [MW:20114] Use of E7018 instead of E7018-1 - Low Temperature Pipe.

Gents,

What all are the practical issues if someone has welded low temperature A333 Gr.6 pipe with wrong electrode E7018 instead of E7018-1.

Regards

Richard

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.