Re: [MW:12157] Requirement of MPT or LPT on bevel ends of butt weld fitting.

Dear Sreeraaj,

I suggest you to do some Home Work before asking.

Checkout the standards used in the manufacturing of Fittings and frame your question.

Hope u will  take this in positive way....


Regards,

Srinivasa

On Sun, Aug 7, 2011 at 7:32 PM, sreeraj panicker <sreerajmannar@gmail.com> wrote:

Dear's,

         Is it any where mentioned in STANDARDS that all bevel ends of carbon steel butt weld fittings, NDT should be carried out such as LPT or MPT by the manufacturer.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.