Monday, August 22, 2011

Re: [MW:12292] PDR for welder overlay on flanges

1)Yes.
2)Yes.

I assume that these flanges are part of nozzles.
Permanent blind flanges which are part of Vessels shall also be U-part stamped if overlayed by welding.( Example: Manway blinds)

Arunachalam

On Fri, Aug 19, 2011 at 8:44 PM, imran khan <imransian@gmail.com> wrote:
Dear All,
 
we are pressure vessel manfacturer  having U - Stamp , we purchase some flanges of carbon steel  which are overlayed, But the supplier did not provide PDR
my question is ,
 
1) Is it required?(Section VIII div. 1 addition 2007)
2)Does the flanges should be stamped "U"

--
With Best Wishes,
 
Imran
 
   

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
Arunachalam.A,
Abu Dhabi Gas Industries Ltd,
P.O.Box # 50124
Abu Dhabi, UAE
Mobile : +971-50-5257122

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...