Sunday, May 29, 2011

Re: [MW:11193] Fw: about A335 Gr P11

Electrode ok, preheat  7 PWHT ref sec1and B31.1

On Sat, May 28, 2011 at 9:36 AM, k.ilangkumaran ilangkumaran <k.ilangkumaran@yahoo.com> wrote:


 
Dear experts,
 
      How do you call this below given material and how to select electrodes should we take operating temperature into account or only like tensile strength of the material and its chemaical composition? Is this carbon steel or low alloy steel since the chemical compositions is 1 1/4Cr-1/2Mo it is lessthan 7% of its total composition or should we call it as cromolly? I had selected this electrode E8016B2 is this ok? I have given preheating 125 deg centigrade and PWHT too. How do we find out the soaking time and rate of raising temp?
 
A335 Gr P11
 
 Can anybody reply me please and I will be so pleased.
 
Regards
Ilangkumaran

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...