Re: [MW:11182] Renewal of Welder Qualification

Hi, As per Sec.IX if the welder is not welded with his qualification limits for 6 months of period,his qualification shall be revoked. But in your case,11/2" dia is also vovers 8".So you can show the RT report as a supporting document for the welder's renewal. Thanks & Regards, (Karthik) Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282 --- On Sat, 5/28/11, limesh M <limesh78@gmail.com> wrote: From: limesh M <limesh78@gmail.com> Subject: [MW:11175] Renewal of Welder Qualification To: "Materials & Welding" <materials-welding@googlegroups.com> Date: Saturday, May 28, 2011, 7:59 PM Dear All, Welder Qualification Code: ASME BPV SEC IX I have a qualified welder with following diameter range. 1.1/2'' and above Now his qualification is going to expire and I would like to renew it by showing supporting radiography reports. Is it possible to renew the above qualification by showing the radiography report of an 8" diameter pipe? Regards, Limesh  -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.