Re: [MW:11166] consumable for s355 JR............

Kalyan,

E7018 WITH smaw process & ER705-3 with GMAW process is fine for S355JR,J2 & EMZ grades.

Vipin

On Fri, May 27, 2011 at 9:28 AM, kalyan vvv <vvvkalli@gmail.com> wrote:

Resp all,

              we established procedure for S355 JR with E7018 in SMAW process. It meets all the mechanical requirements.

              E7018 Electrode is sufficient for welding of S355 JR material  in SMAW process.(Actually this material is european standard material there is no

              exactly equivalent material in  ASTM)
              So It is better to use E7018 electrode.

--

THANKS & REGARDS

 

KALYAN VVV

WELDING ENGINEER

THYSSEN KRUPP INDUSTRIES (INDIA) LTD
HYDERABAD

Mob.NO- 09885273257

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.