Re: [MW:5345] Presure Gauge Limits

Swaminathan,

 

Usually pressure gauges used for hydrotest shall be min 1.5 times the test pressure, which will be specified

in the Flushing & Testing Spec.

Regards,

Ohm-Srinivas

On Tue, Jun 1, 2010 at 12:22 PM, SENTHILKUMAR SWAMINATHAN <skumarswami@yahoo.co.in> wrote:

Dear All,   One of the fire water line to be hydrotest in 3000 ksi, with me available gauge is 4000ksi.   Is there any documents says we can use this limit gauge for testing or shall be tested only with min 6000ksi gauge only?   Regards, S.Senthilkumar Angola

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Ohm Guru Namasivaya

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.