Re: [MW:4440] Procedure qualification Record (PQR)

Hi,

 

Yes you can, provided the maximum deposit of weld metal within limit given in QW 451.1. Refer QW 200.2 (f) for multiple WPS from single PQR.

 

Regards,

Ibrahim

On 5 March 2010 03:54, SENTHILKUMAR SWAMINATHAN <skumarswami@yahoo.co.in> wrote:

Dear All,   I have qualify the PQR using proposed wps Process are GTAW/SMAW/SAW. After all NDT & DT completed on same and actual WPS prepared and production weld also done using that WPS with same welding process.   Now my production dept want to rewrite the WPS using only GTAW & SAW due to repairs on production welds. Because repairs are @ SMAW weld location.   QW-200.4 is permitting this?   Thank you, Regards, S.Senthilkumar

---

The INTERNET now has a personality. YOURS! See your Yahoo! Homepage.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Thanks & Regards
Muhammed Ibrahim PK

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.