If we qualify the welding procedure for the P1 materials with post weld heat treatment then whether it is applicable for the welding without post weld heat treatment ,
Please note that here thickness is not the criteria .Post weld heat treatment is required for some of the process line in Refinery.
Please clarify.
Kamalaksh. A
GLIS GmbH -India
Mobile: +919741506305
Email : kare@gl-group.com
Website: www.gl-group.com
--------------------------------------------------------
Please note: New address of GL Head Office in Hamburg as of March 8, 2010
Germanischer Lloyd
Brooktorkai 18
20457 Hamburg / Germany
Phone and fax numbers as well as e-mail addresses will remain unchanged.
Relocation of GL's Head Office in Hamburg starts mid of February 2010.
--------------------------------------------------------
This e-mail and any attachment thereto may contain confidential information and/or information protected by intellectual property rights for the exclusive attention of the intended addressees named above. Any access of third parties to this e-mail is unauthorised. Any use of this e-mail by unintended recipients such as total or partial copying, distribution, disclosure etc. is prohibited and may be unlawful. When addressed to our clients the content of this e-mail is subject to the General Terms and Conditions of GL's Group of Companies applicable at the date of this e-mail.
If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer.
GL's Group of Companies does not warrant and/or guarantee that this message at the moment of receipt is authentic, correct and its communication free of errors, interruption etc.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment