Why not GTAW+SAW? Full SAW may not give you full penetration + defect free in UT
Dear Friends
We are trying to establish SAW for single sided joint. The base metal is SA516Gr.70. The joint is 25mm thick. The joint is a single bevel groove but joint with included angle of 45degree ( one member is vertical and there is bevel on other member).The final NDT is UT.
Presently we are welding this joint with TIG+SMAW.The joint is circular hence ideal for SAW.
Now we want to try to weld this single sided joint completely with SAW. This is for productivity improvement.
Is it possible to weld this joint having no access from other side with SAW completely ?
Can we keep zero gap, zero rootface, and achieve full penetration joint with SAW??
If yes what should be the parameters, wire dia., etc.
We dont want to use any ceramic backing.
Can anyone suggest how to weld this joint completely with SAW.
This is a development activity. Please share your experience...
Regards
Prem Nautiyal
PREM S NAUTIYAL
CELL : 9820313278
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
As per ASME B31.3, Clause 331.1.6 (b): Any required PWHT shall be carried out in accordance with the qualified WPS. For furnace PWHT inv...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
Subscribe to: Post Comments (Atom)
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment