Thursday, September 11, 2008

[MW:1100] Gasket material to be used for internally lined st. tanks

Pls. let me know what type of gasket to be used for the following:

Project : LNG
Equipmet: storage tank
Service : MEG st. tank
Internal lining: Vinyl ester paint (epoxy)
Op. Temp.: 20 deg. C
Op Pr : Atm.
Des. Temp.: 100/10 deg. C
Des. Pr.: 20/-6 mbarg
Mat'l: CS w/o insulation

Best Regards,
Sudipto Banerjee


=======================================================
Confidentiality Notice

This communication and the information it contains:-
(a) Is intended for the person(s) or organisation(s) named above and for no other person(s) or organisation(s).
(b) May be confidential, legally privileged and protected in law. Unauthorised use, copying or disclosure of any of it may be unlawful. If you have received this communication in error, please contact us immediately by email at Postmaster@fwuk.fwc.com.
=======================================================


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

No comments:

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone