Skip to main content

[MW:1123] FW: Propane sphere collapse

 sharing  info...

From: Vyas, Sohil U. - EHES HSE (HAZ)
Sent: Wednesday, September 17, 2008 9:02 AM
To: Acharya, Darpan T. - EHES Ref. Equip - Planning (HAZ); Gor, Dharmesh C - EHES Ref. Equip - Production (HAZ); Patel, Parimalkumar C - ECIL Production (HAZ); Parmar, Bhavesh B - EHES Production (HAZ); Sisodiya, Manoj K. - EHES Ref. Equip - Production (HAZ); Patel, Mitesh J. - EHES Electrical (HAZ); Patel, Ashish K - EHES Electrical (HAZ); Kelawala, Pranav N - EESL DRI Group (HAZ); Gandhi, Ashish H. - EHES Ref. Equip - Production (HAZ); Varia, Narendra R - EHES Production (HAZ); Sahu, Suresh K - EHES Production (HAZ); Shah, Mayur S - EHES Production (HAZ); Mohammad M. Alam - EHES Steel & MH Equip - Production (HAZ); Patel, Rajesh D .- ECIL Safety (HAZ); Bhatt, Chirag J - EHES Administration (HAZ); Lainingwala, Rinky P - EHES Administration (HAZ)
Cc: Sarin, Ravi - EHES (HAZ); Chakravarty, Gautam - EHES Ref. Equip (HAZ); Krishnan, Udaykumar - EHES Steel & MH Equip (HAZ); Singh, Tarwendar - EHES Production (HAZ); Swaminathan, Sridhar - EHES Stores (HAZ); Lokeshkumar, L. - EHES Electrical (HAZ); Tulsi, Capt Rupinder - EHES Administration (HAZ)
Subject: Propane sphere collapse

 

Respected All,

 

Please look at the attached of incident occurred during hydro test, its lesson for learning.

 

Regards,

Sohil U. Vyas

Safety - EHES (E C I L)

Mo. : + 91 98792 02751

email : Sohil.Vyas@essar.com

(We serve to Save)

 


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

Comments

Popular posts from this blog

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

[MW:36169] Cold Bending Qualification

Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .

[MW:30043] Weep hole

If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .