[MW:1103] RE: 1102] Test Coupon - Mild Steel Plate

the more detailed your Q you may get quick and suitable replies. what code you are using and what type of tests you are intended to do or any additional requirements in the contract. whether it is plate or pipe qualification?

 

If you are using ASME Sec IX and qualification by RT min 6" length radiograph required to interpret, accordingly you may take the test plate. for small dia pipes multiple coupons may require.

 

 

----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com]On Behalf Of Nialel.Lukas@lglgold.com
Sent: Thursday, September 11, 2008 10:11 PM
To: materials-welding@googlegroups.com
Subject: [MW:1102] Test Coupon - Mild Steel Plate

What will be the dimensions for a mild steel plate test coupon, welded using MMWA in all positions or only 6G position to qualify a welder?

 

NIALEL LUKAS

Mechanical Engineering

PO Box 104, Lihir,NIP 

PH: 986 5360

FAX: 968 5359

 

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---