[MW:1096] Re: 1092] Welder Qualification

qualified thickness for procedure is 3mm to 32 mm . Welder can be qualified within that range.

2008/9/10 Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com>

even if it is allowed, what are you going to do with the welder when you don't have a qualified PQR for that thickness?

-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com]On Behalf Of greetings
Sent: Wednesday, September 10, 2008 1:53 PM
To: materials-welding@googlegroups.com
Subject: [MW:1092] Welder Qualification

 PQR Qualified for 16mm plate (AWS D1.1), Can we qualify a new welder for 25 mm plate using same PQR & what should be the maximum thickness plate can we qualify?

 

 

 

--
Thanks & Regards
Muhammed Ibrahim PK

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---