Dear Prasanth ,
You are a Inspector ,not from Construction person ...As far my concerns there is no limit go for re hydro's ..but it is not general practice in construction field ....
Once you rejected the test then you should guide/advice to construction to meet the our requirements ..and also hence they do not have much knowledge about hydro in field ...you need to tell them to do how it will be works out......
Insperctor should not be a barrier for constrction ....Inspector has to inspect the test, make a report and give the proper guidence to them If work is not met the requirements ......
You are not mentioned why you rejected the test ..there is so many criteria claim to fail the test ....so please evaluate the problem and go for next step ....
Thanks
Suresh
On Thu, Aug 11, 2011 at 4:45 PM, prashant pansare <prashantpan_99@yahoo.co.in> wrote:
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Thanks & Best Regards,
Suresh
Mobile No: 91-92 92 905 905
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment