Sunday, August 8, 2010

[MW:6373] welding of astm B88 TEMPER H58 drawn seamless tube type k and ASTM B 62 ,UNS C83600 CAST BRONZE

can you please guide me for adequate brazing procedure and filler metal for the above mentioned materials (BRASS TUBE AND FITTING) conforming with AWS A5.8
 
THANKS AND BEST REGARDS
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...