Hi
I never see in any standard or code to allow in this regard. So I think your Hydro test was rejected . you should release the water & weld the pad & again do the test.
Sincerely yours
Hamed Malekan
.Panahsaz Iran Eng. Co.
.Mechanical Expert (LPG Tanks in South Pars-Assaluyeh)
.Tel: +98 21 88801179 - Fax: +98 21 88900756
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of nawab ali bhatti
Sent: Wednesday, January 06, 2010 2:42 PM
To: materials-welding@googlegroups.com
Subject: [MW:3979] Need confirmation as per code
Dear Members / Friends
I need code reference regarding following
Q.1: Client wants to weld pads without releasing water?
Q.2: Can weld without releasing water, if yes what problems will appear in future?
Q.3: If we can weld, what is the code / standard acceptance criteria?
subcontractor filled water for Hydrotest without completing the welding of some pads(plate 9mm) & shoe supports
Materials as following
1. Pipe Thickness is 23.83 mm
2. Dia 18"
3. Service : high pressure steam
4. Design pressure/temperature is 53.4 bar/427C
5. Test pressure is 148.2 Bar as per B31.3
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Thursday, January 7, 2010
Re: [MW:3983] RE: 3979] Need confirmation as per code
Dear friends,
in my view no code permits for such practices but if client approves you can complete the hydrotest and dewater the line and complte the pad welding, After completion of the pad welding you can do the adiitional NDT on the Pad joints.
Regards
Nageswararao
On Thu, Jan 7, 2010 at 2:24 PM, Hamed <hamkan309090@gmail.com> wrote:
Subscribe to:
Post Comments (Atom)
[MW:34919] Welder qualification certificate
Dear All anyone can share a format for welder certificate and card format Thanks & Best Regards Saleem manhappulath Mob:+9665...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment