Hi,
Normally no need heat treatment graph/Chart with MTC. MTC shall specify the Actual Normalizing Temperature and holding time. If your project specification or customer needs then you have to specify in your purchase order to the mill and then they will provide you chart with MTC.
Thanks& Regards,
(Karthik)
Karthikeyan.S
M: +66-892512282
(Karthik)
Karthikeyan.S
M: +66-892512282
On Tuesday, January 17, 2023 at 05:27:56 PM GMT+7, sujit kumar <sujitkumar19942@gmail.com> wrote:
Dear experts,
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/057e3168-af10-49aa-b025-651ac11e85e8n%40googlegroups.com.
What is SA105N FLANGE as per ASME SEC VIII DIV 1 .....if normalization is required in that flange then what is the requirement of MTC. is this required normalization graph at all in that.
regards.
sujit.
-- https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/057e3168-af10-49aa-b025-651ac11e85e8n%40googlegroups.com.
No comments:
Post a Comment