2) UT thickness machine
3) or if more deep, u can use piano wire technich and scale( non coventional but practicle method)
On Tuesday, February 1, 2022 at 6:16:08 AM UTC+3 KrishnaMoorthy ChinnaSamy wrote:
Dear,Is there any allowances or acceptance criteria for pitting corrosion in offshore structural plate material (S355 JR)…And also how to measure the depth of pitting size…Kindly advise…Thanks & RegardsKrishnaMoorthy
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/bd3173b3-d35d-403f-a055-ed3d3d66cbd8n%40googlegroups.com.
No comments:
Post a Comment