Thursday, February 10, 2022

[MW:32845] Weld and Test Plan

Hello everyone,

My question is regarding weld and test plan preparation. In the weld and test plan, 
Q1. How can one select which process is required at the Long seam or Circumferential seam? and
Q2. using which one can prepare weld and test plan GA/Part drawing or by any other way?

Regards
Shahil Saini
(PGET-Welding)

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALfBO_-V_pNPmg%2BqZz8oD_iLjqA_o-Ci6Vs3Wqx8iWjQTLFyRA%40mail.gmail.com.

No comments:

[MW:35748] Re: PQR- Chemical testing requirements

As answered by everyone, chemical is not required. Notwithstanding, please note that A-No. which denotes weld metal chemical composition is ...