Re: [MW:32918] shall we refer ASME sec VIII div-1 for soaking hours of normalising & tempering process-reg

Cont'd with my above mail

On Wed, Feb 23, 2022 at 11:35 AM Shahil Saini <sainishahil98@gmail.com> wrote:

hello sankaran 

For the above mentioned casting material, refer to the images attached. And In ASME Sec II Part-A, SA217 & SA703 there is not any mentioned detail that for the above materials you can use ASME Sec VIII Div-1, But As per P-No. and G-No. you can refer UCS-56, in that Table UCS-56-3 and UCS-56-4 (please kindly read the general notes).

Thanks and regards

Shahil Saini

PGET-Welding

On Wed, Feb 23, 2022 at 9:30 AM 'Sankaran Sp' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Dear friends,

We used to get A217 - WC6 & A217 -WC9 casting from foundry with  normalising & tempering conditions, these details are given the MTC of the product. while checking the soaking hours for normalising & tempering process, they used to follow 4 hours for all 100 to 200 thickness jobs, when as asked to maintain 5 hours for 125mm, 6 hours for 150mm & 8 hours for 200mm thickness, they refused to increase the soaking hours from 4 hours and asking the reference standard for soaking hours, in this situation shall we refer ASME sec VIII div-1 for soaking hours w.r.to P nos? kindly help me in this regards.      .    

Regards,

Sankaran.SP

Coimbatore, India. 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/2118283400.531862.1645459089014%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALfBO__j6qDu0AjfLi6iHEc85FK%3D7YqoUOEqRBVuQcKrsHBdLw%40mail.gmail.com.