Skip to main content

Re: [MW:31922] Difference between AWS D1.1 & ASME Sec IX

By Materials & Welding
AWS D1.1. - This is for  welding qualification in structural  welding application
                     There are pre qualified WPS s. 
                     Refer respective  chapters for qualification.

ASME SEC IX - This is for welding qualification for pressure  pressure part to pressure part   and pressure  pressure part to non pressure part welding application.
PQR needs to qualify WPS 



On Sat, Jan 9, 2021 at 11:58 AM Hrushikesh Sangamnerkar <hrushi612@gmail.com> wrote:
Dear all,
Kindly share the Difference between AWS D1.1 & ASME Sec IX, if available.

Thank you

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMpWL2rz_WF%2BEKTwA2AAvFfartFgVncf%2BZ3ceGRsgejGRpJ9bw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADder3MGSaRUP-RW503z-gq7EbEYi_0wdfnC46vfCeEw3F8P_Q%40mail.gmail.com.

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

[MW:30043] Weep hole

By Materials & Welding
If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .
Post a Comment
Read more

Re: [MW:30021] Re: Difference between Control thickness & nominal material thickness ( Para. 331.1.3(c)

By Materials & Welding
The control thickness (nothing but a governing thickness for PWHT)  is defined in para. 331.1.3 (a) shall be used. On Wed, 4 Sep 2019 at 12:55, atul khatri < atul.mnnit@gmail.com > wrote: No, Exemption on PWHT is based on Nominal thickness not control thickness. On Mon, Sep 2, 2019 at 7:56 PM anhtrangnghieng < anhtrangnghieng@gmail.com > wrote: Dear Gents,  i understand that if control thickness less than 25.4 mm , preheat & PWHT is not required as per Code ?  thank you.  Vào Th 6, 23 thg 8, 2019 vào lúc 15:25 Kannayeram Gnanapandithan < kgpandithan@gmail.com > đã viết: Nominal material Thickness as  Example--- Pressure pipe is supported by another pipe( non pressure part) is being welded, Pressure part pipe thickness is 20mm whereas non pressure part thickness is 10mm,  In this case Nominal material thickness is 20mm. This is my understanding   THANKS & BEST REGARDS, KG.PANDITHAN, BE, IWE,  CSWIP 3.1, ISO 9712 Level 2 in VT, ASNT-Level II in PT,MT,RT & ...
Post a Comment
Read more