Saturday, January 2, 2021

Re: [MW:31896] Welding of AL 6061 To S890QL.

Direct fusion welding is not compatible. Brazing may be done or Friction stirr welding. 

On Sat, Jan 2, 2021, 7:11 PM Vishwas Keskar <vvkeskar123@gmail.com> wrote:
PL. send  material specification which shall contain 
Chemical  analysis
Mechanical Properties 

Based on this  Welding procedure can be evolved 

On Sat, Jan 2, 2021 at 11:19 AM balaganapathy lingam r <balashivasa@gmail.com> wrote:
Dear experts,
                       Requesting your support for welding consumable and  to weld AL 6061 TO S890QL.

Note, Its only for fixturing purpose no load acts on the same.

Regards 
R.Bglingam 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMQeke9i90Ue%3DO-J_h6fpA_U9FK2cAXLG7gvG6_QgNSVvSntmQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADder3Ok84x3-smkabj%2BHkLyeRyiwxNS6cn-jhC7tKXt2Qi4cA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePjTZ6k7kQv6vrtBYAfawqQAFrvpVttKz2PsD97RtWpoA%40mail.gmail.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...