Hi,
IS 2062 is Indian standard and we are looking the reference in ASME, and so we can't able to see the correlation at anywhere.
Yes – with the help of chemical composition correlation, we can group it to P1.
Further if the WPS is only limited for ISMB of IS 2062, then you can specify directly IS 2062 – no need to mention P number.
P Number is generally used to avoid multiple WPS which falls under the same P numbers & Group numbers
Hope it's clear to you…
Thanks & Regards,
Lakshman Kumar B,
+91 9440031459.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Hemant W Joshi
Sent: Monday, May 29, 2017 9:50 AM
To: materials-welding@googlegroups.com
Subject: RE: [SOCIAL NETWORK] [MW:26543] ISMB 400
Ifg i am not wrong IS 2062 is not covered under ASME. You need to check nthe chem.. composition
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Amol Dhumal
Sent: Monday, May 29, 2017 7:55 AM
To: Materials & Welding
Subject: [SOCIAL NETWORK] [MW:26539] ISMB 400
I have to prepare WPS for IS 2062 E250 BR # ISMB beam, Please let me know what will be the P no and group no of this material ?
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
----------------------------------------------------------------------------------------------------------
Information transmitted by this E-MAIL is intended only for the use of the addressee(s) and contains information that is privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination and or copying of this email in any manner is strictly prohibited and you are requested to delete this e-mail immediately.
Communicating through e-mail is not secure and capable of interception and delays. Any one communicating with TATA Consulting Engineers Ltd., and / or its subsidiaries or associates or group companies by e-mail accepts the risks involved and their consequences.
While this e-mail has been checked for all known viruses, the addressee should also scan for viruses and notify the originator of e-mail.
---------------------------------------------------------------------------------------------------------
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment