Friday, May 26, 2017

[MW:26538] Hardness survey requirement to NACE MR 0175.

Dear Experts,

Please advise on below query.

Applicable code are;
ASME Section IX
NACE MR 0175.

We have one WPS Qualified in butt joint and Hardness survey done  according to NACE MR 0175 (7.3.3.3 Figure 2)  on Butt weld coupon.

​Is it correct that we cannot use the above WPS in a fillet joint because the fillet weld hardness survey is not carried out.

​Thanks.​
Bas

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...