RE: [MW:25508] Usage of ASME Sec 9 WPS for sub contractor

Sorry guys – incorrect answer.

For ASME B&PV fabrication, WPS's and PQR's may not be transferred, given, swapped, or sold between independent companies. The only situation where another company or subcontractor can use your WPS's if the other company or subcontractor works solely under the control of your QC program (such as might happen if you hired temporary welders) . You also need a provision in your quality control program documentation to describe how this is going to implemented.

Too many incorrect answers to this one.

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of syed moinul hasan
Sent: Thursday, October 06, 2016 10:18 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:25497] Usage of ASME Sec 9 WPS for sub contractor

No issue indeed, as long as there is a mutual consensus by both party.

Cheers

Syed Moinul Hasan

On 6 October 2016 at 22:00, 'anand gupta' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Dear

as per ASME SEC IX you can not use wps of another party.

But another part have give written permission to use wps and your client accepted then you can use the wps.

Regards

a p gupta

Sent from Yahoo Mail on Android

On Tue, 4 Oct, 2016 at 18:16, thulaib arakkal

<thulaibwelding@gmail.com> wrote:

Dear All,

We have sub contracted our pipe welding work based on ASME B31.3 and ASME sec IX qualified WPS to another organization. Is it allowed in ASME section IX for a sub contractor to use the main contractor's WPS.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAL2L2JMBzSCg4sYKoc2SsFKSEMEQRi-YwMBpOpAnY%3DQM-gH-JQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/498559274.9392695.1475776831560%40mail.yahoo.com.

For more options, visit https://groups.google.com/d/optout.

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change. Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...

Re: [MW:10788] ON PLOT PIPING & OFF PLOT PIPING

Piping systems involved for the flow lines and gathering lines from the well head isolation valve to the production facility or processing plant isolation valve are determined as OFF PLOT. ON PLOT defines piping system in the processing plant and production platform. ANSI/ASME B31.4 applies for off plot piping system. B31.4 allows the use of either API 1104 or ASME section IX (as appropriate). However, occasionally, a very small system such as piping within 500 feet of a processing plant (some client also said 400 feet) may be declared B31.3 rather than B31.4. When B31.3 is invoked, only ASME Section IX is used. before you decide which code to use for welding procedure and/or welder qualification for pipe welding, you have to know the design and construction code applicable to the system. Please read far enough into scope and diagram illustrating the application of either B31.3 and B31.4 hope this helps rgds 2011/4/21 pradip kumar sil < pradipsil@gmail.com > Dear all, ...

Materials & Welding

Search This Blog