Dear Ankit,
You can wrap gum pu sheet during fabrication to avoid contamination once fully fabricated take out sheet and passivate the whole equipment. Which is cost effective also most of industry follow the same. Gum PU rolls are available in market.
Regards.
Manjunath. T Madiwalar
On Monday, August 1, 2016, Ankit Gandhi <asgandhi.90@gmail.com> wrote:
> Dear sir,
> Can you suggest any material or coating[in INDIA] on Stainless steel for avoiding contamination during fabrication.
> Regards,
> Ankit Gandhi
>
> --
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
> The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
> To post to this group, send email to materials-welding@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ab8289e0-5322-44ff-abbc-eac839165863%40googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> --
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEgsSipSaHwktdzzEhYYG745bRx-C70NK0zewgpAowsx58XV%3DA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment