Dear experts,
-- Please advise on below query.
Ref Code: ASME Sec.IX
WPS Thickness range qualified is 5- 22 mm
Can i conduct WPQ on 4mm or below thick plate or pipe using above WPS if there is a necessity.
Or simply
Does anything restrict that the WPQ coupen thickness or diameter should be within the qualified thickness range of referred WPS?
Thank you.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/0ea15dfc-d965-4fe7-987a-3b96013dd5e1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment