Sunday, September 6, 2015

[MW:23405] Difference between QW-200.2(f) and 200.4(b)

Hi,
Agree with reply, consider all essential, non essential, supplements parameters are same other than BASE METAL thickness RANGE.

Regards
mahesh

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/120237d0-7d10-40dd-96d4-ba1f1e84371e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35374] Material Certification 3.1 / 3.2/2.2--EIL India

Dear Perumal, I answer the same but got one more question where it is written that TPI witness is mandatory? -- https://materials-...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...