[MW:17866] Deposited weld metals

Dear All,

Please clarify my doubt in WPS as per ASME SECTION IX 

Process:  GTAW + SMAW

PQR base metal Thickness:  10.31 mm

WPS Base metal thickness range:  5.0-19.0 mm

Deposited weld metal:  GTAW (5mm)+ SMAW (14mm)

How I can find out the weld metal thickness GTAW 5mm & SMAW 20.62mm

(I saw the section IX, QW-404.30 & QW-450 Table also but I can't understand)

Thank you,

 

Regards,

A.Michael Lawrence

Welding Inspector

0060 105111044.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.