Please ask the manufacturer recommendation other wise do trial or error method.
--Dear sir,
You are going to weld on CS or SS, Generally interpass temp is approx 190 c but again based on group of material.
Regarding about welding parameters you can refer an welding supplier cartoon & documents for setting electrical parameter ,generally vary in root pass ,hot pass & Capping. Also based on the travel speed.
Heat input = v*I/ travel speed.
Regards
Dinesh
Pune @ desk of dubai
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Anant Pandit
Sent: Wednesday, January 30, 2013 10:26 AM
To: materials-welding@googlegroups.com
Subject: [MW:16625] Current/Voltage Requirement for wire 1.6mm for GTAW welding.
Dear Experts,
i want information regarding GTAW welding. I am going to use 1.6mm filler wire, can anybody tell what temp/current/voltage to be maintain..
its urgent... please give your valluable reply...
Regards,
ANANT D PANDIT
For SAFESS QUALITY MGMT PVT. LTD.
PUNE.
MOBILE NO.-: +919604348931
EMAIL-: anant0106@gmail.com
WEBSITE-: http://www.safessquality.com
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
Biplab Pal
Welding Inspector
Information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. Finally, the recipient should check this email and any attachments for the presence of viruses. Myself accepts no liability for any damage caused by any virus transmitted by this email.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment