Re: [MW:15442] suitable welding MIG wire for Weldox 700

Hi   You have to use ER 110S-G MIG wire. While welding strictly maintain an interpass temp. of @ 200 degrees C max., weld with higher travel speeds to reduce heat input inorder to get better properties.   Regards   Prem Nautiyal --- On Mon, 10/1/12, G Sreenivas Rao <gsrinivasg3@gmail.com> wrote: From: G Sreenivas Rao <gsrinivasg3@gmail.com> Subject: [MW:15434] suitable welding MIG wire for Weldox 700 To: materials-welding@googlegroups.com Date: Monday, October 1, 2012, 9:39 AM Dear all Hello to all and  can any body suggest tyhe Mig wire for weldox700 materail, we are the manufacuturer of Industrial centrifugal fans and we require above mentioned suggestion. we are used MIG wire, ER100s,  and ER100S, but we dint get required tensile strength. Regards G.Sreenivas Rao Turbovent Industries Pvt. Ltd. +91 9441511368 -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.