Tuesday, October 2, 2012

[MW:15443] thikness of coupling for DN 156 3000#

 

Dear all,

I want to know the thickness of DN 15 3000# half threaded coupling. As per B 16.11 table6 there is no thickness given four half or full coupling. Pls reply me how we consider the thickness minimum require. Here I had attached B16.11 table 2 & 6 and B 10.9 table -1. Pls reply me for thikness.

 

 

 

 

 

HEMANT SUTHAR

QA/QC

CEPL-SILVASSA

9712973092

 

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...