Dear Experts,
Anybody can advice please, when we use low hydrogen type electrode for steel structure welding erection (SMAW process) does it require to be baked all the time @70 C deg on work station?
Is it acceptable when the welder only keep the electrode into the portable oven without baking (after issued from holding oven) although it is a not best practice?
For information, the material of the steel structure is carbon steel Q235.
Appreciate your sharing. Thanks.
Regards,
Endri
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment