Dear All,
-- Can anybody give the acceptance and rejection criteria as per SSPC PA2. I have applied primer to the shell surface of storage tank. The minimum DFT required is 75 micron. The actual average DFT is 70 micron and above but at some spot I got 15, 30 , 40 microns. Is it acceptable the total area is 2500 M2.
I have taken 5 spot reading in 100 Sqft and each spot is the average of three single reading, in the single reading i am getting 15, 30, 40 microns but average spot reading is above 70 microns.
Thanks in advance
Manoj John.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment