Hi,
for bolting we allow the grease ,but in the gasket surface &flange surface dont allow , bcoz slipping possibilities so it cause gasket cup and damage cant achieve the proper torque also
Regards,
balaji
From: Elshan Feyzullayev <elshan_f@hotmail.com>
To: materials-welding@googlegroups.com
Sent: Wednesday, 9 March 2011 9:07 AM
Subject: [MW:10228] grease using in gaskets between flanges
Hi friends,
Is grease allowed to use in gasket surfaces between flanges bolted in the pipework?
regards,
Elshan.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Is grease allowed to use in gasket surfaces between flanges bolted in the pipework?
regards,
Elshan.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment