Dear Ramesh,
We have been faced same problem in our previous project.I agreed with you that API 650 does not stated clearly about bottom plates distortion.
In best my knowledge we need to minimize the distortion as much as we can during welding.I strongly recommended you to use low heat input and use good condition automatic welding machine.
Thanks
Suresh
QA/QC Specialist
On 6/21/10, Ramesh <ram2ram_2000@yahoo.com> wrote:
Balakrishnan Ramesh
QA/QC Dept
QA/QC Inspector.Tanks/Silos
Daelim Saudi Arabia Co.Ltd
Value Creating Global Plant Builder
SAUDI KAYAN HDPE PROJECT
(KSA #-+966530647157
--- On Mon, 6/21/10, KASHKOUSHA <kashkousha1@yahoo.com> wrote:
From: KASHKOUSHA <kashkousha1@yahoo.com>
Subject: Re: [MW:5682] weld SA-106 to 9 Cr materials P No 5B gr 1 or gr 2
To: materials-welding@googlegroups.com
Date: Monday, June 21, 2010, 12:45 PM
dear ahmed
yes,by using ER 90S-B9(GTAW)&E9018-B9 (SMAW) or E 9015-B9
the joint should be heat treated acc .to ASME B31.3
H.KASHKOUSHA
From: Ahmed Hafez <diesel2002@hotmail.com>
To: Welding Material <materials-welding@googlegroups.com>
Sent: Mon, June 21, 2010 1:42:17 PM
Subject: [MW:5681] weld SA-106 to 9 Cr materials P No 5B gr 1 or gr 2
good morning every one
is it applicable to weld SA-106 to 9 Cr materials P No 5B gr 1 or gr 2
thanks and best regard
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Thanks & Best Regards,
Suresh
Mobile No: 91-92 92 905 905
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment