Dear Asghari
Obviously its including reinforcement.
Just draw the sketch and remove the reinforcement. Then draw the concavity......
From the sketch you will come to know that there is no possibility to get the thickness equal to basemetal if you remove the reinforcement.....
Regards.
CK
-- Obviously its including reinforcement.
Just draw the sketch and remove the reinforcement. Then draw the concavity......
From the sketch you will come to know that there is no possibility to get the thickness equal to basemetal if you remove the reinforcement.....
Regards.
CK
On 9 March 2010 11:06, Ali Asghari <asghariali@rocketmail.com> wrote:
Dear Allaccording AWS D1.1(4.8.1.4),the max depth of root concavity in PQR test piece, is 2mm provided the total thickness of weld is equal or greater than base metal.now the total thickness of weld included reinforcment in face or not?regards
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment