[MW:1055] Re: AISI Grade 4130 Alloy

I think for this u go with B31.1 which is for power piping

On 8/23/08, parviz farhadi <parvizfarhadi@gmail.com> wrote:
> I think for this pressure and temperature still u can use the ASME B31.3
> just use the section K which is high pressure.
>
> Regards,
>
>
> On 8/22/08, ali <ali@propipemanufacturing.com> wrote:
>>
>> Dear Friends,
>>
>> I would appreciate if you be able to give your advice to me about the
>> designing of a very high pressure line heater.
>>
>> I am in process to design a line heater with the following information:
>>
>> MAWP: 10000 PSI @ -40/ 250 F
>>
>> Corrosion Allowance: 1/16"
>>
>> RTJ Weld Neck: 3+1/16" 10K API
>>
>> 4130 Material
>>
>> I realize that this does not fall under the normal construction codes (
>> B31.3 ). However I am unfamiliar with what direction to take. Your help in
>> this matter is greatly appreciated.
>>
>>
>>
>> Sincerely yours'
>>
>> Alia
>>
>>
>>
>> >
>>
>>
>
> >
>

--
Sent from Gmail for mobile | mobile.google.com

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---