[MW:1051] Re: LIMIT OF WELDER QUALIFICATION OVER DIA. RANGE

Dear Dave

 

Babu n carlos are right, u can weld any fillet, in any diameter as per QW451.1 if you have qualification as per /qw451.1 n qw 451.2.

 

You can weld in short

 

Shabbir

On Wed, Aug 20, 2008 at 6:39 PM, babu raghavan <babuprmech@yahoo.com> wrote:

Mr: S.N.DAVE CHECK ASME SECTION IX  QW 451.4.You can see the details.This welder can weld 3/4 " socket weld.   BABU.P.R   --- On Fri, 8/15/08, shailesh dave <snd2988@yahoo.com> wrote: From: shailesh dave <snd2988@yahoo.com> Subject: [MW:1034] Re: LIMIT OF WELDER QUALIFICATION OVER DIA. RANGE To: materials-welding@googlegroups.com Date: Friday, August 15, 2008, 8:47 AM Dear Romio,   It is ASME SEC. IX.   Regards,   S.N.Dave --- On Thu, 8/14/08, romio dabre <romiomdabre@gmail.com> wrote: From: romio dabre <romiomdabre@gmail.com> Subject: [MW:1032] Re: LIMIT OF WELDER QUALIFICATION OVER DIA. RANGE To: materials-welding@googlegroups.com Date: Thursday, August 14, 2008, 5:10 PM please write the code? As per ASME sec IX it is not allowed On Wed, Aug 13, 2008 at 12:11 PM, shailesh dave <snd2988@yahoo.com> wrote: DEAR MEMBERS,   I HAVE COME ACROSS AN INTERESTING SITUATION.   WE HAVE WELDERS QUALIFIED IN 6" x 7.11 mm THK. PIPE OFF COURSE BUTT WELD. MY QUESTION IS CAN THESE WELDER PERFORM WELDING OF SMALL BORE PIPE LIKE 3/4" SOCKET WELD.   PL. HELP ME.   REGARDS,   S.N.DAVE   QA/QC INCHARGE ADGAS, DAS ISLAND, UAE

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---